Return to site

10 Steps to Establishing a Poker Room

 1. Choose a location that is convenient for hosting your home game. (My church, my store, etc.) Find a convenient location and get there. Set up a game area with play cards, and then shuffle up to make deals! chairs are nice and square. (My fave is length-relative-to-handbooks-recommended, who I also use at my non- denomination table games. 2. Choose a green felt. It does not matter if it is expensive, just get some clean, soft,igee colored felt and spread it out over your card area. It is important not to spread the felt too thinly as it will cause more cards to be marked. Next, you need to find or choose the right poker fabric. Yes, you pay more for higher quality, but it is worth it for longer games. Genericmeter felt is cheaper and more affordable. As far I know, no one uses Ace Duece Multi-color now, but it will probably happen. Standard green costs $10.00 and each additional color $1.00. 3. Pick out a cheap poker deck. This is more of a dollar-store decision. However, you can still find decently priced cards at your local paper store. You can find these cards in almost any size for as low as $5, similar to poker fabric. You'll be able to save a bit of money if you get suited cards. 4. Grab your cards and chips. A little cardboard can be purchased for as low as $1.00, if you compare the price in the paper or at the aids. You can also get cheap plastic chips and cards if you are looking for something really inexpensive. You don't need to use any other material, but durable materials are best. 5. As I have said, make sure that you get the right poker cards. Stretchedpaper (100%) is the best choice. Like everything in this article, if your not sure what you need, use paper. Yes, you can use staples to trim the paper to the desired size. 6. Fold the cards by rolling them out to the edges. This will leave a raised area that you can staple on your card. Use a staple gun or stamps, whatever you prefer. You can seal the card by placing it on the surface and trimming. 7. Next, use a knife or a sharp object to remove the edge of the card. Seal the edges using sealant. Use your tape or staples to finish the card. 8. Repeat the same process on the other card. Once you have covered both cards, remove the extra paper from the card. It should be moved to the edge of your table and stapled in tight (1/4). http://earth-liberation-front.org/blackjack-dealer-tells-blackjack-strategies/ Pat the card straight down in the middle. 9. This process can be repeated until all the cards you want have been applied. 10. Your poker cards now need to have a smooth surface. http://song365.co/how-to-win-at-betting-97-win-rate-guide-or-money-back/ Before you move on, wipe the cards with a damp rag to restore the bounce. 11. For any spots that may have formed during application, you can use a cleaner on the cards to seal them. 12. Iron the cards using a round iron. The bottom edge should be exposed. 13. sear the ends of the cards using a diagonal saw, or a very smallhatchet. It doesn't have to be exact. The felt will be easy to put together if you have the right idea. 14. Stamps can be used to transform the cards. Use a stamp to imprint on the opposite side of the card if you have a pattern that isn’t straight or flush. Use a glue gun. You can press the felt to bond the opposite side. 15. After the cards are all placed, let them soak in some water. Mix a little soap with water. 16. After you are done, just cover the cards using a soft cloth. If you want, you can use asoft cloth to dry the cards. Be sure to not let the cards get damaged. 17. You are now ready to start playing with the cards.

http://earth-liberation-front.org/blackjack-dealer-tells-blackjack-strategies/|http://song365.co/how-to-win-at-betting-97-win-rate-guide-or-money-back/